GE Hotpoint Washer Run Capacitor 60µF 250VAC — 290D1102P003 WH12X27614 Globe MPP

Washer hums but won't agitate or spin? Check the run capacitor first.

This is the 60µF motor run capacitor used in GE and Hotpoint top-load washers. It is made by Globe Capacitors, the maker printed on the original part, and carries GE part number 290D1102P003 on the label — match that number, or the 60µF / 250VAC rating on your old capacitor, before ordering.

The MPP (metallized polypropylene) film design is self-healing, protected (P2), and contains no PCB. The label diagram shows the built-in 20µH inductor fitted to this washer application. Two spade terminals with insulating caps make it a direct plug-in swap for the original.

Features

• Exact-rating replacement: 60.0µF ±5%, 250VAC, 50/60Hz
• Globe Capacitors GCS-RS series, self-healing MPP film
• Built-in 20µH inductor per label diagram
• 10000 AFC, P2 protected, no PCB
• cRUus (C22.2 No. 190) and CE marks printed on label
• Round aluminum can, 2 quick-connect spade terminals
• Batch 20250517 — fresh stock, not a salvaged pull

Condition note: New. The aluminum cans show light scuffs and scratches from shelf / bulk handling, and one unit photographed has a small dark mark near the base. See photos — the unit you receive will be from the same batch and condition.

Fitment note: Cross-references WH12X24103, WH12X27614, WH12X29017, WH13X28838 and prior revision 290D1102P002. Commonly fitted to GE GTW220, GTW335, GTW460, GTW465, GTW490, GTW500, GTW680, GTW685 and GTW750 series and Hotpoint HTW200 series top-load washers. Always confirm by part number and rating on your original capacitor.

Specifications

What's included

• 1 × run capacitor (order quantity = number of capacitors)

Frequently asked questions

What does a washer run capacitor do?

It helps the drive motor start and keep running through agitate and spin. A failed capacitor is a common cause of a washer that hums, won't agitate, or won't spin.

How do I know this is the right one?

Match part number 290D1102P003 (or a cross number above) and confirm 60µF / 250VAC on your old capacitor's label.

Is this new or used?

New, batch 20250517. Not a used pull. Light can scuffs from handling are shown in the photos.

Is installation difficult?

It is a 2-terminal plug-in part, but capacitors can hold a charge. Unplug the washer and discharge the old capacitor safely, or have a qualified technician fit it.

Stock note: New, 15 on hand at Mel Supply, Columbus Warehouse (Columbus, KS) and ready to ship.